T7 hydraulic issue

[Tractors82]

Hi, we are having trouble with our T7 NH remotes being slow to lift implements. They will work at normal speed if operating the loader at the same time. We have replaced both the shuttle check tee valves but made no difference. Has anyone else experienced this?

 

[Ridgewolf]

Yeah, it sounds like those remotes are slow unless the loader is running. The first thing I’d do is check the flow and pressure at the remotes, that usually shows if there’s a real hydraulic lag or just a small restriction.

 

[Bluehydrau]

I've come across that issue before.
If the shuttle tees don’t solve it, keep an eye out for sticky lines or any quirks with the valves.
It's typical for loader motion to mask the problem.

 

[Braingrain]

I’ve had that happen too. It’s a good idea to check the flow to the remotes while they’re under load, often a slight pressure bleed can slow everything down.